Products

KDE300A Inverter

Inuput Voltage 1phase/3phase 220V:200V~240V
3 phase 380V-480V:380V~480V
Allowed Voltage fluctuation range -15%~10%
Input frequency 50Hz / 60Hz,fluctuation less than 5%
Output Voltage 3phase:0~input voltage
Overload capacity General purpose application:60S for 150% of the rated current
Light load application:60S for 180% of the rated current
Control mode V/f control
Sensorless flux vector controlwithout PG card(SVC)
Sensor speed flux vector control with PG card (VC)
Operating mode Speed control, Torque control(SVC and VC)
Speed range 1:100 (V/f)
1:200( SVC)
1:1000 (VC)
Speed control accuracy ±0.5% (V/f)
±0.2% (SVC)
±0.02% (VC)
Speed response 5Hz(V/f)
20Hz(SVC)
50Hz(VC)
frequency range 0.00~600.00Hz(V/f)
0.00~200.00Hz(SVC)
0.00~400.00Hz(VC)
Input frequency resolution Digital setting: 0.01 Hz
Analog setting: maximum frequency x 0.1%
Startup torque 150%/0.5Hz(V/f)
150%/0.25Hz(SVC)
150%/0Hz(VC)
Torque control accuracy SVC:within 5Hz10%,above 5Hz5%
VC:3.0%
V/f curve V / f curve type: straight line, multipoint, power function, V / f separation;
Torque boost support: Automatic torque boost (factory setting), manual torque boost
Frequency giving ramp Support linear and S curve acceleration and deceleration; 4 groups of acceleration and deceleration time, setting range 0.00s ~ 60000s
DC bus voltage control VdcMax Control: Limit the amount of power generated by the motor by adjusting the output frequency to avoid over-voltage trip; VdcMin control: Control the power consumption of the motor by adjusting the output frequency, to avoid jump undervoltage fault
Carrier frequency 1kHz~12kHz(Varies depending on the type)
Startup method Direct start (can be superimposed DC brake); speed tracking start
Stop method Deceleration stop (can be superimposed DC braking); free to stop
Model AdaptableMotor(KW) Output current(A) Size (mm)
Heavyload / Lightload Heavyload Lightload (H x D x W)
Single phase: 2 00-240V,50/60Hz
KDE300A-R75GS2 0,75 KW 4 7 186x125x164
KDE300A-1R5GS2 1,5  KW 7 9,6 186x125x164
KDE300A-2R2GS2 2,2 KW 9,6 17 186x125x164
Three phase: 380 -480V,50/60Hz
KDE300A-R75GT4 0,75 KW 2,1 4 186x125x164
KDE300A-1R5GT4 1,5 KW 3,8 5,6 186x125x164
KDE300A-2R2GT4 2,2 KW 5,1 9 186x125x164
KDE300A-3R7G/5R5PT4 3,7 / 5,5 KW 9 13 248x160x183
KDE300A-5R5G/7R5PT4 5,5 / 7,5 KW 13 17 248x160x183
KDE300A-7R5G/011PT4 7,5 / 11 KW 17 25 248x160x183
KDE300A-011G/015PT4 11 / 15 KW 25 32 322x208x192
KDE300A-015G/018PT4 15 / 18,5 KW 32 37 322x208x192
KDE300A-018G/022PT4 18,5 / 22 KW 37 45 322x208x192
KDE300A-022G/030PT4 22 / 30 KW 45 60 455x290x218
KDE300A-030G/037PT4 30 / 37 KW 60 75 455x290x218
KDE300A-037G/045PT4 37 / 45 KW 75 90 555x320x240
KDE300A-045G/055PT4 45 / 55 KW 91 110 555x320x240
KDE300A-055G/075PT4 55 / 75 KW 112 152 635x410x239
KDE300A-075G/090PT4 75 / 90 KW 150 176 635x410x239
KDE300A-090G/110PT4 90 / 110 KW 176 210 654x460x340
KDE300A-110G/132PT4 110 / 132 KW 210 253 654x460x340
KDE300A-132G/160PT4 132 / 160 KW 253 304 795x460x320
KDE300A-160G/200PT4 160 / 200 KW 304 357 886x520x385
KDE300A-200G/220PT4 200 / 220 KW 377 426 886x520x385
KDE300A-220G/250PT4 220 / 250 KW 426 465 1350x750x432
KDE300A-250G/280PT4 250 / 280 KW 465 520 1350x750x432
KDE300A-280G/315PT4 280 / 315 KW 520 585 1350x750x432
KDE300A-315G/355PT4 315 / 355 KW 585 650 1450x850x432
KDE300A-355G/400PT4 355 / 400 KW 650 725 1450x850x432
KDE300A-400G/450PT4 400 / 450 KW 725 820 1450x850x432
KDE300A-450G/500PT4 450 / 500 KW 820 860 1450x850x432
KDE300A-500G/560PT4 500 / 560 KW 860 950 1800x1050x460
KDE300A-560G/630PT4 560 / 630 KW 950 1100 1800x1050x460

Datasheet

Datasheet

Manual

Reviews

There are no reviews yet.

Be the first to review “KDE300A Inverter”

Your email address will not be published. Required fields are marked *